Foundation aanbrengen: zo krijg je een egale, natuurlijke finish

Applying foundation: how to achieve an even, natural finish

Table of Contents

    Mineral foundation works slightly differently from other foundations. Although the start is the same, you have to determine the right colour. You do that by placing small stripes along your jawline. The stripe of foundation that stands out the least, so not too dark or too light, is your colour. This colour can change per season, because your skin also changes colour during the summer and winter seasons. So check every now and then whether you are still using the right colour or whether your current foundation has become a bit too dark or too light.

    Mineral foundation evens out the complexion best when you work with a kabuki brush in small amounts. Start with one light layer over the whole face and then build coverage only where discolouration or blemishes are still visible. Two thin layers almost always look calmer than one thick layer. Between the layers it is best to give the product a moment to blend with your skin's natural oils, so the next layer is received better and the end result is more even.

    In short

    • Always test the colour along the jawline and in daylight, never only on your hand.
    • Work the powder well into the brush before it touches your face; that prevents a patch with the first stroke.
    • Start with a light layer over the whole face and build coverage only locally.
    • Mineral foundation can look softer a few minutes after application, once it has blended with your skin's natural oils.
    • A kabuki brush is suited to blending; a more compact concealer brush gives more targeted coverage.

    Before you start: check these three points

    1. Does the colour match your neck?

    Don't test foundation only on your hand, as your skin colour there is slightly different from your face. Apply a small amount along the jawline and look at the shade in daylight. The right colour forms a calm transition between face and neck and still looks natural after a few minutes. Not sure between shades? Samples are handy for trying several colours in a small pot, so you don't accidentally put the wrong shade in your basket. Don't know yet which undertone suits you? Read how to determine your foundation colour first.


    2. Is your skin ready for powder?

    Cleanse the skin gently, apply suitable skincare and let all layers absorb well. The skin may feel supple, but should not be wet, sticky or oily. On a base that is too moist, mineral powder clings in patches; on tight skin, flakes become more noticeable. A primer is optional; use it thinly and only where it genuinely improves the result. Want to know more? Read choosing a primer.


    3. Do you have the right amount?

    Less is more. Start with less than you think you need. A small amount in the lid is usually enough for a first layer. Too much powder at once makes it harder to blend evenly and can give a dry or heavily powdery finish, which is less attractive.


    The kabuki technique in seven steps

    1. Shake a small amount of foundation through the sifter in the lid.
    2. Swirl a clean kabuki brush through the powder.
    3. Work the product well into the bristles of the brush, so it doesn't just sit on top.
    4. Tap the brush gently against the edge of the lid to remove loose powder.
    5. Start at the jaw or the outer side of the cheek and work with light circular movements inwards and upwards.
    6. Blend along the hairline, jaw and nose without leaving a thick edge there. Don't forget your neck and, if applicable, your décolleté.
    7. Assess the result in daylight and add a second thin layer only in the areas you want.

    The aim is not to sweep powder across the skin: by distributing the minerals in a controlled way with the brush, a thin layer forms that looks more and more even. Keep the pressure light; a firm hand doesn't automatically give more coverage. You can also use a stamping technique, applying the powder to the skin by stamping it on.


    From lid to skin: where technique makes the difference

    • Work the powder into the brush: swirl calmly in the lid until the product sits evenly between the bristles, and tap off excess powder before the brush touches your face.
    • Don't start in the middle of the nose: start on a larger part of the face, for example the outer side of the cheek, and only then move over the nose and around the mouth with what is left on the brush.
    • Blend beyond the visible boundary: check the hairline, jawline, nostrils and the area in front of the ears; blur there with what is still in the brush so no edge forms.
    • Give the minerals a moment: mineral powder foundation can still look a little powdery shortly after application. Wait a few minutes and only then decide whether extra coverage in the form of a new layer is needed.

    Building more coverage without a mask effect

    An even base doesn't have to be equally thick everywhere. First apply one light layer to balance the face, and then build further only where discolouration, blemishes or shadow are still visible.

    1. Good base first: let skincare absorb completely, so powder doesn't build up in dry patches.
    2. Build up layers: pick up product with the kabuki brush, tap the back of the brush on the table so the powder settles into the bristles, and apply with soft, circular movements.
    3. More coverage where needed: apply any final layer by stippling instead of sweeping, for a more covering result without looking heavy.
    4. Combine with concealer: for blemishes or dark circles, first use a colour corrector or concealer, before or just after the foundation; see applying concealer.
    5. Set: finish with a light layer of powder where needed; see setting make-up for the right amount per skin zone.

    Area Approach
    Cheeks Blend thinly, add extra product only where the complexion is uneven
    Around the nose Little product, small movements to prevent build-up in tiny creases
    Forehead Spread what is left on the brush towards the hairline
    Jawline Blur without picking up a new amount of powder
    Individual spots Press a small brush gently onto the skin and blend the edge


    Colour correction before or after foundation?

    You can neutralise strong colour differences in a targeted way before applying the base: apply a small amount of green corrector to the red area, blur the edge and then place foundation over it. A skin-coloured concealer or retoucher can instead be handy after the first foundation layer, so you can see exactly where extra coverage is still needed. Dab rather than rub, so the layer underneath stays in place.

    Adapt the method to your skin

    • Dry or dehydrated skin: pay extra attention to comfortable hydration and use as little powder as possible on flaky patches.
    • Oily or quickly shiny skin: use a thin, light layer of skincare and still apply foundation in small amounts; blot away shine later in the day before you touch up.
    • Combination skin: treat the face zone by zone; the same foundation, but with an adjusted amount and pressure.
    • Sensitive or red skin: work with clean, soft tools and limit friction; stop when the skin clearly reacts.

    Not sure which formula or coverage suits your skin type? Read choosing a foundation by skin type.

    Kabuki brush versus concealer brush

    Kabuki brush Concealer brush
    Shape Full, soft and wide More compact and firmer
    Best for Spreading foundation evenly over the whole face Building up precisely on small areas
    Result Light to medium coverage, airy finish More buildable, targeted coverage
    Combination Kabuki first for an even base Then concealer brush for extra coverage where needed

    See the full range in the brush collection or read which make-up brush do I need for a complete overview.

    Choose your final finish consciously

    After foundation you can stop when the skin looks even and comfortable; extra powder is not a mandatory step. If you want to temper shine or let the complexion products blend more softly, use a very small amount of finishing powder, especially where shine appears and not automatically thickly over dry cheeks. This is the basis of your daily make-up; afterwards you can extend it with a bronzer or a blush to bring a little more colour and depth back into your face.

    This often goes wrong and how to fix it

    • The foundation looks patchy: the skincare may still be too wet or there is too much powder on the brush. Stop adding, take a clean brush and lightly blend the edges.
    • The finish looks too powdery: remove loose product with a clean brush and wait a few minutes before judging further.
    • The colour seems too dark or too light: don't correct a wrong colour with more and more bronzer or finishing powder; test again along the jawline and remember that your skin tone differs between summer and winter.
    • An edge forms at the jaw: blend with what is left on the brush towards the neck and ears, instead of picking up new product.
    • Powder settles into lines: use less product around the eyes and mouth and remove build-up with a clean brush.

      Make-up mishap: colour too dark Make-up mishap: too much powder layered up.

    Your brush is part of the result

    Old product residue makes distribution less predictable and can distort colours.

    • Use a completely dry brush for loose mineral powder.
    • Clean frequently used brushes regularly with a mild cleanser.
    • Let the bristles dry lying flat or with the head slightly downwards, so water doesn't run into the base.
    • Store clean brushes in a dry place, separate from used sponges.

    Read the full cleaning routine in cleaning brushes.

    Frequently asked questions about applying foundation

    Do you apply mineral foundation with circular or dabbing movements?

    Use light circular movements for larger areas of the face. On redness or an individual spot you can first stamp gently and then blur only the edge.

    How much mineral foundation do I need?

    Start with a small amount in the lid. Only add a second thin layer after you have looked at the first result in daylight. If you don't find the coverage sufficient yet, you can add another layer; that varies per person and depends on taste.

    Concealer before or after foundation?

    Colour correction, such as green on redness, can go before foundation. A skin-coloured concealer or retoucher is often better used after the first layer.

    Can I use mineral foundation on dry skin?

    Yes, as long as the skin is comfortably prepared and there is no thick, wet layer of skincare on top. Use little powder and avoid extra product on flaky areas.

    How do I make foundation look good for longer?

    Use suitable skincare, let layers absorb, work in small amounts and touch the face as little as possible. Set only where necessary.

    Related articles